FirboLan GigaBit Ethernet 1000Base-T to1000 Base - SX/LX Fiber Converter
FirboLan - GSM1010 - GSM1011 - GSM1012 - GSM1013 - GSM1014

10/100Base-TX-FX conversion Distances -up to 150km BMD for trouble-free deployment Internal PS Constant Loop-Back via FEF Easy installation Single-Fiber-Strand for fiber saving

The FirboLan GigaBit Ethernet 1000Base-T to1000 Base - SX/LX Fiber Converter provides conversion from a copper (1000Base-T) interface to single-mode (1000Base-LX) or a multi-mode (1000Base-SX) link allowing its extension up to 80km. As most of the GBE switches or NICs come with low cost copper (RJ-45) ports, combining such with the GSM1010 provides the most flexible and cost effective way to extend their reach over fiber. The heart of the GSM1010 is a powerful conversion processor while link interfaces are implemented by industry standard components. This design provides a reliable and steady conversion, advanced control /diagnostic features and Management, while maintaining full compatibility with other vendors' standard devices. The device generates "FDX advertising" signals on its copper port to ensure that the interconnected device - even a non managed one - is set to Full Duplex - a critical mode in GBE. FibroLAN's unique Link Segmentation Test (LST) allows easy link segmentation (selective per port) to facilitate network diagnostics and overcomes the fault propagation which is inherent to GBE F/O links. A Loop-Back function on each port simplifies troubleshooting of link problems. Each port provides separate Link and Activity indications for enhanced diagnostics. The GSM1010 is also available in SNMP managed versions as well as in MA™ versions, facilitating its remote in-band management from a system. The device is housed in a robust metal case suitable for desktop, rack-shelf or wall-mount installation. It features an internal, wide-range, quality power supply for trouble free installation and reliable operation. The TP port features Auto-Cross and Auto-Polarity correction for trouble free installation. DC powered versions (-48VDC) are available. The ETR (Extended Temperature Range) option allows deployment in non-office environments.

Speifications

Standard Compliance
IEEE802.3 2000edition, 1000Base-T, 1000Base-SX,
1000Base-LX, IEEE802.3z, IEEE802.3ab
Management
SNMP versions 1&2, Telnet, RS232 (GSM1010M)
Remote via system (GSM1010/MA)
F/O Port
Duplex SC connector, see specifications below
LEDs
Power ON, MA Active
Per Port - Link, Activity, LST, Loop-Back
Conversion Method
Digital with FDX Advertising, Link Segmentation Test
and Loop-Back
TP Port
Shielded RJ-45, Auto-Cross, Auto-Polarity Correction
DIP switches (front panel) per port
LST ON/OFF
Loop-Back ON/OFF
Power-Supply
Internal, 100 240 VAC, 50 60Hz; DC PS - optional
Operating Temperature
Operating: 0° †+45°C
Storage: -20° †+80°C
Safety
Designed to meet UL 1950:1995, EN 60950
Dimensions
120x170x40mm
Power Consumption
5 Watts maximum
Humidity
10% †90% non-condensing
EMC
FCC part 15, Subpart B, Class A;
ICES 003:1997, Class A; EMC Directive 89/336/EEC
Weight
400 gram

Part # Model F/O Port
Fiber Minimal Output Typical Receive Wavelength Suggested
Power Sensitivity Distance km

B166 GSM1010 S/M -13dbm -20dbm 1310nm 0-10
B167 GSM1011 S/M -5dbm -20dbm 1310nm 5-20
B168 GSM1012 S/M -8dbm -23dbm 1550nm/DFB 10-40
B169 GSM1013 S/M 0dbm -24dbm 1550nm/DFB 25-80
B186 GSM1014 M/M -9.5dbm -17dbm 850nm 220/500


Options
B097 PS48 DC (-36 -72VDC) option (instead of AC PS) for all GSM models
B098 ETR Extended Temperature Range (-10°C +70°C) option for all GSM models
B012 CTF-RM 19" rack shelf for installation of up to 3 GSM devices
B161 SCH-WM Wall Mount kit for all GSM models

 

see other Fibrolan Media Converters

see other Gigabit Fiber Optic Media Converters