T1 Channel Bank by DCE

DCE T1 Channel Bank

This T1 channel bank acts as a T1 mux, converting 24 digital channels to 24 analog channels. Our T1 channel bank comes with a 5 year warranty, and our new price is hundreds of dollars less than most refurbished channel banks.

The DCE T1 Channel Bank is the most cost effective T1 channel bank on the market.

DCE T1 Channel Banks are much easier to install than any other channel bank on the market today. There is no programming or software to learn. With our new "Auto-Config" feature, you can just plug it in, and the channel bank is ready to go. If you are needing more than just a voice application, the Rhino Channel Bank now supports data, and is configurable channel by channel. It is the most flexible channel bank on the market.

The DCE T1 channel bank uses the latest, fully digital embedded technology. This means higher reliability and lower cost. The bank provides as "standard" what other units can't provide OR charge extra for.

A warranty of more than a year is almost unheard of in the telecommunications industry. A warranty that goes beyond 2 years is even more scarce. A 5 year warranty of any kind is proof the unit is rock solid.

By supporting the most common start protocols (Immediate, Wink, Loop, Ground, DID), as well as either D4 or ESF and AMI or B8ZS, the Rhino channel bank can be installed in a wide variety of situations including dynamic data channels. "Auto Config" makes the unit truly "plug and play" - the only channel bank of it's kind!

DEC T1 Channel Bank Specifications

	Operating Environment: 0 C – 70 C 32 F – 166 F
	Humidity: Non-condensing up to 95% relative humidity
	Power Requirements: 110 VAC
	Power Usage: Fuse Rating: 1A
	T1 Requirements: Standard 4 wire T1 via an RJ48C jack
	Start Protocols: Immediate, Loop, Ground, Wink, and DID
	Framing protocols: D4 or ESF
	Line Coding: AMI or B8ZS
	Analog Output: 24 Loop start lines via 25 pair amphenol connector
	Data Output: V.35 utilizing a DB25 connector
	Physical size: 3.5” tall (2U), 17” wide and 8.5” deep
	Weight: 12 lbs.
	Mounting: 19” or 23” rack mountable. Unit can also be mounted on the wall.
	Channel capacity: 24 POTS FXS
	Caller ID capable

click on picture for larger view

A LCD display is used during the installation process. Most problems that arise during an installation are the result of mismatched protocols between the channel bank and the carrier's T1 line. The display shows what is being sent in on the T1 and what is going out from the channel bank.

This T1 D4 channel bank T1 Channel Bank can operate on a D4 (SF) or ESF T1 line. The bank supports either SF or ESF with either AMI or B8ZS line coding. The start protocols supported are: Immediate Start, Wink Start, Loop Start, Ground Start and DID. (These are standard and are used by all T1 service providers.) On the analog side the Rhino presents 24 loop start lines (FXS).

The DCE T1 Channel Bank interfaces directly with most PBXs and almost all voice mail systems. Calling party disconnect is also supported by the Rhino.

Manufacturer:	Adtran	Carrier Access	Carrier Access	DCE
Model:	Total Access 750	Adit 600	Access Bank I	24FXS
Web Site Address:	adtran.com	carrieraccess.com	carrieraccess.com	channelbanks.com

Physical size:	2 U	2 U	1 U	2 U
Weight:	8 lbs.	11.8 lbs.	14.5 lbs.	12 lbs.
Mounting:	19" or 23" rack mount	19", 23" or wall	19", 23" or wall	19", 23", desktop or wall
Channel Capacity:	24 FXS	24 FXS	24 FXS	24 FXS
T1 Requirements:	Standard 4 wire T1	Standard 4 wire T1	Standard 4 wire T1	Standard 4 wire T1
Start Protocols:	Immediate, Loop,	Immediate, Loop,	Loop or Ground	Immediate, Loop,
	Ground, and WINK	Ground, and WINK	Ground, and WINK	Ground, WINK and 3 different DID
Framing Protocals:	D4, ESF or TR08	D4 or ESF	D4, ESF, TR08 or SLC-96	D4 or ESF

Line Coding:	AMI or B8ZS	AMI or B8ZS	AMI or B8ZS	AMI or B8ZS
Analog Output:	FXO or FXS	FXO or FXS	24 Loop start lines	24 Loop start lines
Display of signaling bits?	No	No	No	Yes
Data Output:		Dual V.35 cards	V.34 and V.90	V.35, RS530,
				RS530A or RS449
Method of configuration:	PC, serial port or modem	PC, serial port or modem	Dip switches	Automatic Plug and Play T1 configuration
Caller ID capable:		Yes		Yes
Power Requirements:	130VAC max.	115VAC	(-)48 VDC	110VAC
Power Usage:		3.5A	1A input	1A
Operating Environment:	(-)40C to 70C	32F-104F/0C-40C	32F-122F/0C-50C	32F-166F/0C-70C
Humidity:	Non-cond. up to 95%	Non-cond. up to 95%	Non-cond. up to 95%	Non-cond. up to 95%
Manufacturers Warranty:	10 year limited warranty	10 year limited warranty	5 year warranty	5 year limited warranty

List Price:	$2,256	$4,375	$2,375	$1,495

610-399-3911
Fax 301-924-7403

3405 Olandwood Court
Olney, MD 20832

e-mail experts@dceexpress.com