|
|
Codex Motorola
Telenetics
326X modems |
Telenetics 3260 3261
3262
3263 3265 3266 modem,
and the 3267 3268 modem
|
Motorola / Codex /
Telenetics
3265 3266 X modems
V.34,
V.32bis, V.32, V.22 bis, V.22, V.21, Bell 212, Bell 103 128.0, 115.2, 96.0,
76.8, 64.0, 57.6, 38.4, 28.8, 14.4, 12.0,9.6,7.2,4.8, 2.4Kbps -
see
3265 3266 3267 3268 modem pages
|
Optimize your dial
or lease performance with sync throughput up to a blazing 128 kbps
World's fastest sync modem utilizes advanced Synchronous Data
Compression (SDC) to transmit synchronous data up to 400% faster than
any other modem.
| Features |
Benefits |
| AT, V.25bis and LPDA-2 command set automatic calling
interfaces |
Sets calling interfaces via front panel or network
management system |
| ITU V.8 Automode |
Allows for automatic selection of modulation types and speed
on call connection |
| V.42 error correction |
Supports CCITT LAP-M and MNP class 4 |
| V.42bis and MNP 5 |
Data compression, with automatic negotiation on connection |
| Adaptive Rate System (ARS) |
Continuously adapts modem rates to optimize through put
independent of prevailing line conditions |
| Remote Configuration, via network management, front panel,
and AT commands |
Easy use allows network to be utilized to its maximum
potential |
| Extensive Security, including Password & Callback, front
panel lockout, silent answer and more |
Controls unauthorized access to your modem and your network |
| Network Management Ready |
Network can adapt to growth and change |
see
3265 pages
Transmission Rates:
128.0, 115.2, 96.0, 76.8, 64.0, 57.6, 38.4, 28.8, 14.4,
12.0,9.6,7.2,4.8, 2.4Kbps (+0.01%Sync. for all speeds except:
56Kbps-.35%, 21.6Kbps +.08% and 16.8Kbps-.1%) (+2.5% async.) 1.2Kbps
and 300bps also supported in asynchronous only (+2.5%)
Non-Compressed Mode Transmission Rates:
33.6 28.8, 24.0, 21.6, 19.2, 16.8, 14.4, 12.0, 9.6, 7.2, 4.8, 2.4,
1.2Kbps (+0.01% Sync.) (+/-2.5% async.); 300 also supported in
asynchronous only(+2.5%) (326x V.32bis to 14.4Kbps)
Operating Modes:
V.34, V.32bis, V.32, V.22 bis, V.22, V.21, Bell 212, Bell 103
Line Types
 | 2-wire dial line operation |
| 2/4 wire leased line operation (model dependent) |
Error Correction:
V.42, LAP-M & MNP 4
Data Compression:
V.42bis & MNP 5
Transmitter Section:
| Output Level tolerance: +/-1.0db |
| Output level: country dependent |
| Timing: Selectable internal, external, loopback |
Certification Compliance:
| Safety: UL 1950, CSA 950, TUV, IEC 950
|
| Telecom: Country compliance as required
|
| EMI/RFI Emissions: CISPR 22 Class A VDE 0878 Class A (German
model) |
Environmental
| Operating temperature: +32 to 122F (O to 50 C)
|
| Storage temperature:-40 to 158 F (-40 to +70 C)
|
| Relative humidity: 0 to 95% non-condensing |
Compressed Mode Transmission Rates:
128.0, 115.2, 96.0, 76.8, 64.0, 57.6, 38.4, 28.8, 14.4,
12.0,9.6,7.2,4.8, 2.4Kbps (+0.01%Sync. for all speeds except:
56Kbps-.35%, 21.6Kbps +.08% and 16.8Kbps-.1%) (+2.5% async.) 1.2Kbps
and 300bps also supported in asynchronous only (+2.5%)
Non-Compressed Mode Transmission Rates:
33.6 28.8, 24.0, 21.6, 19.2, 16.8, 14.4, 12.0, 9.6, 7.2, 4.8, 2.4,
1.2Kbps (+0.01% Sync.) (+/-2.5% async.); 300 also supported in
asynchronous only(+2.5%) (326x V.32bis to 14.4Kbps)
Operating Modes:
V.34, V.32bis, V.32, V.22 bis, V.22, V.21, Bell 212, Bell 103
Line Types
| 2-wire dial line operation |
| 2/4 wire leased line operation (model dependent) |
Error Correction:
V.42, LAP-M & MNP 4
Data Compression:
V.42bis & MNP 5
Transmitter Section:
| Output Level tolerance: +/-1.0db |
| Output level: country dependent |
| Timing: Selectable internal, external, loopback |
Certification Compliance:
| Safety: UL 1950, CSA 950, TUV, IEC 950
|
| Telecom: Country compliance as required
|
| EMI/RFI Emissions: CISPR 22 Class A VDE 0878 Class A (German
model) |
Environmental
| Operating temperature: +32 to 122F (O to 50 C)
|
| Storage temperature:-40 to 158 F (-40 to +70 C)
|
| Relative humidity: 0 to 95% non-condensing
|
|
Helpful hint
How to reset a Motorola Codex 3266
modem which is password protected and I do not know the password.
1)- Close switch 4 on the rear panel (mini-switches).
2)- Turn on the modem.
3)- Push "Return", and then push the button "|>" until you find the option "Reinit
memory".
4)- Press "Enter". You will see a message which says: "Reinit all memory?".
Press "Enter" again.
Note: When you reinit the memory, you will lose the whole information that you
saved in the memory, and will reset to factory default settings.
|
3260 v.32bis
(cards fit Modulus racks) |
|
| 3260 modem Dial S/A |
40370/21002 |
| 3261 modem LL & Dial S/A |
40371/21057 |
| 3262 modem Dual Dial Card |
40372/21100 |
| 3263 modem LL & Dial Card |
40373 |
| |
|
|
3260 V.34
(cards fit modulus racks) |
|
| 326X modems V.34 33.6K Upgrade Kit(Min.
Installed revision of 7.5) |
42552 |
| 3260 modems Fast V.34 Managed |
42600 |
| 3261 modems V.34 LL & Dial-Up |
42601 |
| 3262 modems V.34 Dual Card |
42602 |
| 3263 modems V.34 LL & Dial card |
42603 |
| 3266 modems V.34 LL & Dial stand
alone INTL 110V |
42625 |
| 3268 modems V.34 33.6 LL and Dial line
modem card |
42627 |
| 3266 modems V.34 UI stand alone |
42629 |
| 3260 modems V.34 Fast SDC |
42700 |
| 3261 modems V.34 Fast SDC |
42701 |
| 3262 modems V.34 SDC Dual Dial Card |
42702 |
| 3263 modemsV.34 SDC LL & Dial Card |
42703 |
| 3266 modemsV.34 SDC international stand
alone |
42740 |
| 3268 modems V.34 SDC LL + Dial Card UI |
42741 |
| 3260 modemsV.34 SDC V.35 |
42746 |
| 3261 modems V.34 LL and Dial SDC V35 S/A |
42747 |
| 3262 modems V.34 SDC V35 Dual Dial Card |
42748 |
| 3263 modems V.34 SDC w/v.35interface
LL & dial card |
42749 |
|
see
3265 page |
|
|
see
3266 page |
|
|
