Telenetics MIU202T/MIU202TLV Modem

bullet HARDENED Bell 202T & V.23 4 WIRE LEASED LINE modem
bulletTelenetics MIU202T modem - 48 to 220 Volts AC or DC Power
bulletTelenetics MIU202TLV modem - 9 to 36  Volts DC Power
bulletTelenetics MIU202Tpowerport modem - 5 or 12  Volts DC Power

The Telenetics MIU-202T modem can be powered from a wide range of AC and DC voltages, is surge protected on both the power and telephone lines and will operate in extreme heat and cold. Ideal for both point-to-point and multi-drop applications over leased lines and private lines.

Telenetics has designed modems that work in "remote" remote sites with very low failure rates. These devices work where other modems roll over and die. When a service call to a remote site can mean an all day trip these modems are the ideal solution.

Bell 202T continues to be the standard of choice in many utility and industrial applications. The Telenetics MIU202T can be powered from a wide range of AC and DC voltages, is surge protected on both the power and telephone lines and will operate in extreme heat and cold. Ideal for both point-to-point and multi-drop applications over leased lines and private lines.

horizontal rule

bullet

0-1200bps Over Unconditioned Lines

bullet

Point-to-Point or Multi-Drop

bullet

MIUPowePort 202T
9 to 12 Volts AC/DC Power

bullet

MIU202T
48 to 220 Volts AC/DC Power

bullet

MIU202T-LV
9 to 36  Volts DC Power

bullet

IEC801-4 Surge Protection

bullet

-40oC to +85oC Operating Temp.

bullet

Low Power Consumption
for Solar Power Applications

bullet

4.0Watts @ 12VDC

bullet

For Meters, RTUs, SCADA, etc.

horizontal rule

go to MIU202T manual PDF file      

horizontal rule

The MIU202T MIU202TLV and MIUPowerPort202T modems

The Telenetics MIU202T modem and MIUPowerPort202T are a Bell Standard 202T modems designed for asynchronous operation at 0 to 1800bps with C2 line conditioning, or 0 to 1200bps on unconditioned lines.

With the flip of a switch, the 202T can be configured for V.23 applications if required.

The modem is intended for use on leased lines and private lines and provides half duplex communications on 2-wire lines, or full duplex communications on 4-wire lines.

Most modem manufacturers have abandoned Bell 202 in favor of the much higher speed modulations preferred in dial-up systems. However, Bell 202 remains the standard of choice in many utility and industrial applications where relatively small amounts of data are to be transmitted point-to-point or in multidrop networks.

The MIU202T version can be powered from any AC or DC voltage in the range 9V to 220V AC/DC  The MIUPowerPort202T has 9 to 12V power supply.  The 202T  is designed to work in extended temperatures ranging from -40oC to +85oC, and is surge protected to 8kV, double the voltage requirements of IEC801-4 Standard.

All of this is bundled in a 5-3/8" x 4" x 1-3/8" package, suitable for desktop or wall mounting. Rack mount cards are also available.

MIU202T MIU202TLV MIUPowerport modem Technical Specifications

Power Supply:
MIU202T 48 to 220 Volts AC or DC
Power Consumption:
15mA @ 48VDC;
7.5mA @ 115VAC;
7.5mA @ 125VDC

Operating Environment:
-40oC to +85oC, 0 to 95%
humidity (non-condensing)
MIUPowerPort  9 to 12 Volts AC or DC

MIU202T-LV 9 to 36 VDC

Power Consumption:
71mA @ 12VDC
65mA @ 12VDC
Data Rate: (for both)
0 to 1200bps on Unconditioned Lines
Digital Port:  RS232
MIU               - DB9 Connector
PowerPort -  DB25
Analog Port: RJ11
Power Connector:
MIU has 3-Pin with Screw Terminals
PowerPort has 5.5mmX2.0mm plug
Case Size:
5-3/8" x 4" x 1-3/8"
Surge Protection 
(Power Line):

8kV [Exceeds IEC801-4]
Surge Protection
(Analog Line)

3.75kVac
Data Rate: Asynchronous

0 to 1200bps on Unconditioned Lines

Modulation

Bell 202 and V.23 (Dip Switch Selectable)
Phase Coherent, Frequency Shift Keyed (FSK)

Operation:

Full Duplex Over 4-Wire Leased or Private Lines
Half Duplex Over 2-Wire Leased or Private Lines
(Constant or Switched Carrier, Dip Switch Selectable)

Carrier Frequencies:
Mark: 1200 Hz 0.1%
Space: 2200Hz 0.1%
Test Features:
Analog Loopback
Line Impedance:
600 ohms
Antistreaming:
0 or 45 seconds
Transmitter Output Level:
0 or -10dBm
Receive Sensitivity:
-33 or -42dBm
RTS/CTS Delay:
1, 16, 35 or 51msec
Carrier Detect Delay:
15msec
Soft Carrier Turnoff:
0 or 8.3msec

go to other Telenetics MIU modems

610-399-3911
Fax 301-924-7403

3405 Olandwood Court
Olney, MD 20832

e-mail experts@dceexpress.com