| |
DIN Rail mounted -
DC Power
ANS-105
Industrial Ethernet Switch |
DC powered 12, 24,
VDC Industrial rated 10/100baseT Switch
and also available in 115 and 230 VAC power
DIN rail mounted 10BaseT and 100BaseT Ethernet switch

Features
 | Complies with IEEE 802.3 10 Base-T, IEEE 802.3u 100
Base-TX, and IEEE 802.3x flow control standards |
 | Provide 5 10/100 Mbps switch ports
|
 | Each port supports both 10/100 Mbps speed
auto-negotiation and auto-sensing |
 | Full/half duplex operation for each port
|
 | Supports 8K MAC addresses |
 | Store-and-forward architecture |
 | Non-blocking switching |
 | Supports full-duplex flow control (IEEE 802.3x)
|
 | Back-pressure flow control in half duplex mode
|
 | Compact design with small footprint
|
 | DIN rail mount for industrial usage built-in |


The NS – 105 provides an inexpensive
flexible solution for small to medium sized applications that need DC power with
a DIN rail mounting and auto-negotiation for connection speed and duplex type .
It is ideal for the those industrial applications.

Specifications
 | Port Configuration: Auto-negotiation for connection
speed and duplex type |
 | Connector: Shielded RJ-45 Jack |
 | Cables:
 | 10 Base-T (Cat.3,4,5 UTP cable, 100m max.)
|
 | 100 Base-T (Cat.5 UTP cable, 100m max.)
|
|
 | Filtering Address: Unicast / Multicast / Broadcast
address: 8K MAC addresses per unit |
 | Filtering rate: 14,880 pps for Ethernet, 148,800 pps
for Fast Ethernet |
 | Forwarding rate: 14,880 pps for Ethernet, 148,800 pps
for Fast Ethernet |
 | RAM Buffers: 2MB |
 | LEDs:
 | Power status |
 | 10/100, Link/Activity, Duplex/Collision status for
each port |
|
 | Environment:
 | Temperature: 0 ~ 60 C degree |
 | Relative Humidity: 10% to 90% non-condensing
|
|
 | Dimension: 160 mm x 70 mm x 125 mm |
 |
Power: DC 10 ~ 30 V, 7W |

jump to
manual
jump to
NS-108 8 port DC
power Industrial Ethernet Switch
jump to
ANS-115FT 5 port
fiber DC and 230VAC powered Industrial Ethernet Switch 
|