Adtran smart 16/16E shelf rack chassis

ADTRAN Smart 16/16e Shelf

The ADTRAN Smart 16/16e Shelf (part number 4200023L3 - 4200023L4 - 4200023L5 - 4200023L6) provides a rackmount, high-density solution for central site WAN connectivity requirements. The shelf provides flexibility, allowing installation of a mixture of 16 WAN communication devices. ADTRAN has a complete offering of ISDN, DDS, Switched 56, and FT1/T1 products that operates in the shelf. The Smart 16/16e shelf may be configured for 19" or 23" mounting with either AC or DC powering. Load sharing and redundancy are provided with an optional second power supply. The shelf incorporates a mid plane design that facilitates hot swapping for all devices, including the power supplies.

A common controller card is used to configure and control all devices installed in the shelf. Up to 15 additional shelves may be daisy chained and controlled locally or remotely by a VT 100 terminal attached to a single controller card. An optional hand-held 2x16 LCD display and key pad (DATMATE) is available for local configuration by connecting directly to the front of the controller card via the RJ-11 jack.

The ADTRAN Smart 16/16e Shelf (part number 4200023L3, 4200023L4, 4200023L5,and 4200023L6) version provides SNMP Management via an embedded SNMP agent. Access is available through either a SLIP/PPP (async) port or a 10BaseT Ethernet port. Telnet access is also provided in this version. Through the Management Information Base (MIB)-II standard and ADTRAN-supplied enterprise MIBs, the Smart 16e Shelf allows for configuration, monitoring, and troubleshooting of each device using standard SNMP network management programs such as HP OpenView®, NetView®, and SunNet Manager®.

Features of the ADTRAN Smart 16/16e Shelf
4200023L3, 4200023L4, 4200023L5,and 4200023L6)

bulletOne shelf supports 16 ADTRAN DDS, ISDN, T1 or Switched 56 products
bulletEmbedded SNMP and Telnet
bulletSLIP/PPP (async) and 10 Base T Ethernet ports are provided for SNMP access (Smart 16e)
bullet19" or 23" rackmount shelf system
bulletAC or DC powered with optional redundant power supply
bulletController card configures and controls all 16 devices and allows access to an additional 15 shelves
bulletVT 100 terminal interface for configuration, diagnostics, and performance monitoring of local and remote units
bulletOptional hand-held DATAMATE for local configuration
bulletDry relay contacts provide alarm indications
bulletMidplane design facilitates hot swapping
bulletStandard 5 year warranty


Fax 301-924-7403

3405 Olandwood Court
Olney, MD 20832